ProSoft Technology ProLinx S3964R Manual de usuario descargar pdf (Pagina 26)

MVI46-S3964R ♦ SLC Platform Module Configuration

Siemens 3964R Protocol

Page 26 of 74 ProSoft Technology, Inc.

2.5.2 Baud Rate

300 to 115200

This parameter specifies the baud rate to be used on the port. Valid values are

300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, and 115200.

2.5.3 Parity

N, O, E

This parameter specifies the parity setting for this port. Valid values are N =

None, O = Odd, E = Even.

2.5.4 Data Bits

7 or 8

This parameter specifies the number of message data bits. Valid values are 7 or

8 bits.

2.5.5 Stop Bits

1 or 2

This parameter specifies the number of message stop bits. Valid values are 1 or

2 stop bits.

2.5.6 RTS On

Delay (in milliseconds) after RTS before message is sent.

2.5.7 RTS Off

Delay (in milliseconds) after message before RTS dropped.

2.5.8 Minimum Response Delay

The minimum amount of time in milliseconds to wait before responding to a CP

message.

2.5.9 Use CTS Line

Yes or No

This parameter specifies whether or not to monitor CTS modem line.

2.5.10 Swap

0 or 1

This parameter specifies whether bytes should be swapped. 0 = No data byte

swapping, 1 = Data byte swapping.

April 17, 2008

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 73 74

Sin comentarios

ProSoft Technology ProLinx S3964R Manual de usuario Pagina 26