ProSoft Technology RLXIC-EH Manual de usuario Pagina 66

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 111
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 65
RLXIC-EH Intelligent Cellular IP Manager
RadioLinx Intelligent Cellular Ethernet Gateway for HSUPA (3G GSM) Networks User Manual
Page 66 of 111 ProSoft Technology, Inc.
May 29, 2009
*DNSUPDATE - This command sets how often you want DNS Updates to be
requested. Otherwise the RLXIC-EH will only send updates when it is reset,
powered up, or the IP address is granted by network changes.
Use Alternate DNS 2 - Set another DNS User.
Note: You can set up a second DNS User, if you have two DNS users.
*DNS1 and *DNS2 - The primary and secondary DNS servers set by Provider
when your RLXIC-EH gets its IP address.
*DNSUSER - Set this, if desired, to an additional DNS server to query first
before the primary or secondary (just as a hosts file is queried first on a
computer). If *DNSUSER is set to 0.0.0.0, it will be ignored.
8.5.2 The "PPP-Peer" Domain Name
The RLXIC-EH uses the unqualified domain name of "ppp-peer" when it is in
PPP or SLIP address mode to resolve the address of the device or computer
connected via PPP or SLIP address. If the RLXIC-EH is not in PPP or SLIP
address mode, "ppp-peer" will resolve to 0.0.0.0.
Vista de pagina 65
1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 110 111

Comentarios a estos manuales

Sin comentarios