Prosoft-technology CLX-APACS Manual de usuario descargar pdf (Pagina 30)

Page 24 QTS-CLX-APACS March 2015

In this example, the module is in rack 1slot 6. The alias is for an analog input from

channel 2 on the module, which is mapped to ControlLogix address input data at offset 1

of connection 8.

To build the alias name, ClxApacsMonCfg prefixes the name with the module name and

an underscore. It prefixes the address with the RSLinx path specifier.

Opening a Configuration File

To open a configuration file, select File/Open..

This does not change the configuration in the module; the configuration in the module

changes only when you download.

Clearing the Configuration

To clear the configuration in the program, select File/New.

This does not change the configuration in the module; the configuration in the module

changes only when you download.

Setting the RSLinx Path

Select Tools/Set RSLinx Path… to assign or change the current RSLinx path.

This may be useful if, for example, you have more than one QTS-CLX- APACS module.

Changing the Module Mode

Select Tools/Change Module Mode… to switch a QTS-CLX-APACS module between

monitor and master modes, or to update the module firmware (see page 44)

Select the firmware to download and click Apply. When the download is complete,

ClxApacsMonCfg displays the version of the firmware downloaded.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 52 53

Sin comentarios

Prosoft-technology CLX-APACS Manual de usuario Pagina 30