Prosoft-technology CLX-APACS Manual de usuario descargar pdf (Pagina 7)

QTS-CLX-APACS Module Overview

The QTS-CLX-APACS connects a ControlLogix controller to an APACS

IOBUS

network.

Use the QTS-CLX-APACS to migrate APACS systems to ControlLogix controllers. You

can retain the APACS I/O as the first step in the migration.

The module acts as either a monitor or as a master on the APACS IOBUS. You select the

mode by downloading different firmware to the module, using the Windows configuration

programs provided.

In monitor mode, the QTS-CLX-APACS sends APACS I/O input and output data to input

data in the ControlLogix. It cannot transmit on the bus.

In master mode, the ControlLogix sends output data to the QTS-CLX-APACS, which then

transmits it as output data on the APACS IOBUS. The QTS-CLX-APACS sends APACS

input data to input data in the ControlLogix.

The QTS-CLX-APACS:

• supports IOBUS cable redundancy

• supports up to the maximum of 39 I/O cards allowed by the APACS IOBUS in a

maximum of 4 MODULRACS

The QTS-CLX-APACS communicates with the ControlLogix processor using scheduled

connections. You configure the module in RSLogix 5000 (v19 or greater) with up to:

• 10 I/O connections, 9 for data and 1 for status

1 2 3 4 5 6 7 8 9 10 11 12 ... 52 53

Sin comentarios

Prosoft-technology CLX-APACS Manual de usuario Pagina 7