Prosoft-technology MVI69-ADMNET Manual de usuario descargar pdf (Pagina 13)

MVI-ADMNET ♦ 'C' Programmable Preparing the MVI-ADMNET Module

'C' Programmable Application Development Module with Ethernet Developer's Guide

ProSoft Technology, Inc. Page 13 of 122

February 20, 2013

2.2 Jumper Locations and Settings

Each module has three jumpers:

 Setup

 Port 1

 Port 2

2.2.1 Setup Jumper

The Setup jumper, located at the bottom of the module, should have the two pins

jumpered when programming the module. Once programmed, the jumper should

be removed.

2.2.2 Port 1 and Port 2 Jumpers

These jumpers, located at the bottom of the module, configure the port settings

to RS-232, RS-422, or RS-485. By default, the jumpers for both ports are set to

RS-232. These jumpers must be set properly before using the module.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 121 122

Sin comentarios

Prosoft-technology MVI69-ADMNET Manual de usuario Pagina 13