Prosoft-technology AN-X-PB Manual de usuario descargar pdf (Pagina 45)

AN-X-PBCAPT Page

Selecting an AN-X

Before you can perform an operation on an AN-X, you must select it.

Choose Utilities/Select An AN-X to select a specific AN-X.

From the Adapter list, select the network adapter that connects to the

Ethernet network that contains the AN-X.

In the Ethernet MAC Address field, enter the MAC Address of the AN-X

you wish to select. It can be found on the AN-X label or using the

Locate All AN-X Modules command. The format is as shown above, six

pairs of hexadecimal digits separated by hyphens.

In the IP Address field, enter the Ethernet IP address of the AN-X you

wish to select. It can be found using the Locate All AN-X Modules

command. The format is as shown above, four decimal numbers each in

the range 0 to 255.

Both MAC address and IP address must match the settings on the AN-X

in order for communication to occur.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 60 61

Sin comentarios

Prosoft-technology AN-X-PB Manual de usuario Pagina 45