Prosoft-technology MVI56E-LDM Manual de usuario Pagina 217

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 264
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 216
ControlLogix Platform "C" Programmable Cable Connections
Linux Application Development Module Developer's Manual
ProSoft Technology, Inc. Page 211 of 264
March 12, 2014
6.2.2 RS-232: Null Modem Connection (Hardware Handshaking)
This type of connection is used when the device connected to the module
requires hardware handshaking (control and monitoring of modem signal lines).
6.2.3 RS-232: Null Modem Connection (No Hardware Handshaking)
This type of connection can be used to connect the module to a computer or field
device communication port.
Note: For most null modem connections where hardware handshaking is not required, the Use
CTS Line parameter should be set to N and no jumper will be required between Pins 7 (RTS) and 8
(CTS) on the connector. If the port is configured with the Use CTS Line set to Y, then a jumper is
required between the RTS and the CTS lines on the port connection.
Vista de pagina 216
1 2 ... 212 213 214 215 216 217 218 219 220 221 222 ... 263 264

Comentarios a estos manuales

Sin comentarios