Prosoft-technology MVI69E-MBTCP Manual de usuario Pagina 81
- Pagina / 150
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
MVI69E-MBTCP ♦ CompactLogix Platform Using Controller Tags
Modbus TCP/IP Enhanced Communication Module User Manual
ProSoft Technology, Inc. Page 81 of 150
May 20, 2015
MBTCP.CONTROL.EventCommand_DBData
This array allows the processor to dynamically build Modbus commands with
data associated to the module’s database. This feature is meant for periodic
execution such as resetting clock and zeroing-out counters.
Tag Name
Range
Description
MBTCP.CONTROL.EventCommand
_DBData.Trigger
0 or 1
Toggle to send Event Command.
0 = Disable, 1 = Enable
MBTCP.CONTROL.EventCommand
_DBData.ClientID
0 to 19
Client ID associated with the command to be
executed
MBTCP.CONTROL.EventCommand
_DBData.ServerIPaddress
xxx.xxx.xxx
.xxx
IP address of target Modbus server
MBTCP.CONTROL.EventCommand
_DBData.ServicePort
502 or
2000
Service port of target Modbus server
MBTCP.CONTROL.EventCommand
_DBData.SlaveAddress
1 to 255
Slave address of target Modbus TCP/IP to serial
device, if applicable
MBTCP.CONTROL.EventCommand
_DBData.InternalDBaddress
0 to 9999
(word-level)
or
0 to 65535
(bit-level)
Specifies the module’s internal database
register to be associated with the command.
Allowable range is:
0 to 9999 for Modbus Function Codes 3, 4, 6, or
16
0 to 65535 for Modbus Function Codes 1, 2, 5,
or 15.
MBTCP.CONTROL.EventCommand
_DBData.RegisterCount
1 to 125
(words)
or
1 to 800
(coils)
Specifies the number of registers or digital
points to be associated with the command.
Modbus Function Codes 5 and 6 ignore this field
as they only apply to a single data point.
MBTCP.CONTROL.EventCommand
_DBData.SwapCode
0,1,2,3
Specifies if the data received from the Modbus
server is to be ordered differently than received
from the server device.
This parameter is helpful when dealing with
floating-point or other multi-register values, as
there is no standard method of storage of these
data types in server devices.
MBTCP.CONTROL.EventCommand
_DBData.ModbusFC
1,2,3,4,5,6,
15,16
Specifies the Modbus function to be executed
by the command.
MBTCP.CONTROL.EventCommand
_DBData.DeviceModbusAddress
0 to 9999
Specifies the register or digital point address
offset within the Modbus server device. The
MBTCP client reads or writes from/to this
address within the server.
MBTCP.CONTROL.EventCommand
_DBData.StatusReturned
0 = Fail
1 = Success
-1 = Client is not Enabled and Active
MBTCP.CONTROL.EventCommand
_DBData.CmdInQue
Number of commands in the queue waiting to
be executed
- MVI69E-MBTCP 1
- Your Feedback Please 2
- Content Disclaimer 2
- Important Safety Information 3
- Contents 5
- 1 Start Here 9
- 1.1 System Requirements 10
- 1.2 Deployment Checklist 11
- 1.3 Setting Jumpers 11
- 1.5 DVD Contents 15
- 1.6 Package Contents 15
- EW MODULE 19
- dialog box 19
- Profile 21
- ATA-INT 22
- to save 26
- EVISION 16 or newer 30
- MPORT RUNGS 31
- AGS under 32
- MPORT RUNGS… 38
- AGS to show the 39
- INAL NAME 39
- 3.1 Basic PCB Functions 44
- 3.1.2 Renaming PCB Objects 44
- DD ROW 45
- IEW CONFIGURATION 46
- ILE menu and then click 46
- 3.2.1 Module 47
- 3.2.2 MBTCP Servers 48
- 3.2.3 MBTCP Client x 50
- CLIENT X 51
- OMMANDS icon 51
- Parameter 52
- Description 52
- 3.2.5 Ethernet 1 54
- 3.2.6 Static ARP Table 55
- OWNLOAD FROM PC TO DEVICE 56
- PLOAD FROM DEVICE TO PC 59
- 4.2 Backplane Data Transfer 64
- 4.3 Normal Data Transfer 65
- Read Register Start: 0 66
- Read Register Count: 480 66
- Write Register Start: 480 66
- Write Register Count: 480 66
- 4.4.1 Server Mode 70
- 4.4.2 Master Mode 72
- 5 Using Controller Tags 75
- ESCRIPTION 76
- ESCRIPTION column 78
- 5.3.1 MBTCP.CONFIG 79
- 5.3.2 MBTCP.DATA 80
- 5.3.3 MBTCP.CONTROL 80
- 5.3.4 MBTCP.STATUS 86
- 5.3.5 MBTCP.UTIL 89
- 6.1 Ethernet LED Indicators 93
- 6.2 LED Status Indicators 94
- 6.2.2 Troubleshooting 95
- 1 Port on the module 96
- IAGNOSTICS 97
- ET UP CONNECTION button 97
- SSIGN TEMPORARY 97
- ETUP CONNECTION button to 99
- EST CONNECTION to 99
- 6.4.1 Diagnostics Menu 100
- ERVERS to 102
- ONFIGURATION 102
- 7 Reference 107
- 7.2.1 Modbus Client 109
- 7.2.2 Modbus Server 110
- Function 119
- 7.3 Floating-Point Support 121
- 7.4 Function Blocks 127
- Word Data Block (9956) 138
- Float Data Block (9957) 139
- In This Chapter 147
- 8.2 Warranty Information 148
Relacionado con productos y manuales para Relé Prosoft-technology MVI69E-MBTCP
Relé Prosoft-technology MVI69L-MBS Manual de usuario
(154 paginas)
(154 paginas)
Relé Prosoft-technology MVI69E-MBS Manual de usuario
(162 paginas)
(162 paginas)
Relé Prosoft-technology PS69-DPM Manual de usuario
(130 paginas)
(130 paginas)
Relé Prosoft-technology MVI69-EGD Manual de usuario
(96 paginas)
(96 paginas)
Relé Prosoft-technology MVI69-DNPSNET Manual de usuario
(119 paginas)
(119 paginas)
Relé Prosoft-technology MVI69-ADMNET Manual de usuario
(122 paginas)
(122 paginas)
Relé Prosoft-technology MVI69-ADM Manual de usuario
(342 paginas)
(342 paginas)
Relé Prosoft-technology MVI69-MCM Manual de usuario
(167 paginas)
(167 paginas)
Relé Prosoft-technology MVI69-HART Manual de usuario
(169 paginas)
(169 paginas)
Relé Prosoft-technology MVI69-PDPMV1 Manual de usuario
(225 paginas)
(225 paginas)
Relé Prosoft-technology MVI69-GSC Manual de usuario
(102 paginas)
(102 paginas)
Relé Prosoft-technology MVI69-DNP Manual de usuario
(129 paginas)
(129 paginas)
Relé Prosoft-technology MVI56-103M Manual de usuario
(152 paginas)
(152 paginas)
Relé Prosoft-technology MVI56-DFCMR Manual de usuario
(113 paginas)
(113 paginas)
Relé Prosoft-technology MVI56-101S Manual de usuario
(193 paginas)
(193 paginas)
Relé Prosoft-technology MVI56-104S Manual de usuario
(188 paginas)
(188 paginas)
Relé Prosoft-technology MVI56E-MNETCR Manual de usuario
(159 paginas)
(159 paginas)
Relé Prosoft-technology MVI56-PDPMV1 Manual de usuario
(255 paginas)
(255 paginas)
Chief FCABX18_36 Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Hardware Chief FCABX18_36.
Wir stellen 1 PDF-Handbücher Chief FCABX18_36 zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung
Comentarios a estos manuales