Prosoft-technology 5201-DFNT-104S Manual de usuario Pagina 112

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 157
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 111
104S v2 ProLinx Gateway Reference
(Firmware v2.xx) Protocol Manual
Page 112 of 157 ProSoft Technology, Inc.
Two block IDs per command type are required to allow the detection of a new
block. So the remote node can switch between two block IDs when a new
command block for the same type is requested. Even if the block only contains a
request with response type, then offsets 0 and 99 must also trigger to a new
value to allow the gateway to detect a new block. Follows below some examples
to illustrate this functionality. This section will not cover each block structure but
will only cover the block transfer mechanism. For these examples consider the
default configuration settings:
March 19, 2010
Vista de pagina 111
1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 156 157

Comentarios a estos manuales

Sin comentarios