Prosoft-technology 5201-DFNT-BACNET Manual de usuario descargar pdf (Pagina 36)

Client Error/Status Data BACnet ♦ ProLinx Gateway

Protocol Manual BACnet/IP Client Edition 2

Page 36 of 52 ProSoft Technology, Inc.

November 24, 2010

4.1 Client Error/Status Data

The Client connection Error and Status Data areas are discussed in this section

The error/status data table is located at a virtual address assigned by ProLinx. If

this data is moved to the gateway's database using the gateway's data mapping

feature, it will be available to the other protocol supported on the gateway. If it is

not mapped into the gateway's database, the data will only be available through

the Configuration/Debug Port.

The data area is initialized with zeros whenever the module is initialized. This

occurs during a cold-start (power-on), reset (reset push-button pressed) or a

warm-boot operation (commanded or loading of new configuration).

Note: The ProLinx Reference Guide contains detailed information on accessing the contents of the

following registers.

4.1.1 BACnet Client 0 Status

The following table lists the data areas that can be mapped from the virtual

addresses into the gateway's internal database.

Status Register Description

12300 Command Request Count

12301 Command Response Count

12302 Command Error Count

12303 Number of Request Packets

12304

Number of Response Packets

12305 Errors Sent

12306 Errors Received

12307 Configuration Error Word

12308 Current Error

12309 Last Error

12310 to 12409 Command List Errors (1 word register for each command)

12410 to 12499 No Valid Data

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 51 52

Sin comentarios

Prosoft-technology 5201-DFNT-BACNET Manual de usuario Pagina 36