Prosoft-technology 5205-DFNT-PDPS Manual de usuario descargar pdf (Pagina 29)

Configuration PDPS ♦ ProLinx Gateway

PROFIBUS DP Slave

ProSoft Technology, Inc. Page 29 of 61

December 31, 2008

Byte 7 Spec_User_Prm_Byte

Bit Name Significance Default State

0 Dis_Startbit The start bit monitoring in the receiver

is switched off with this bit

Dis_Startbit = 1,

That is, start bit monitoring is switched off.

1 Dis_Stopbit Stop bit monitoring in the receiver is

switched off with this bit

Dis_Stopbit = 0

That is, stop bit monitoring is not switched

off.

2 WD_Base This bit specifies the time base used to

clock the watchdog.

WD_Base = 0: time base 10 ms

WD_Base = 1: time base 1 ms

WD_Base = 0

That is, the time base is 10 ms.

3 to 4 Res To be parameterized with 0 0

5 Publisher_Enable DXB-publisher-functionality of the

SPC3 is activated with this bit

Publisher_Enable = 0, DXB-request-

telegrams are ignored;

Publisher_Enable = 1, DXB-request-

telegramme are processed

6 to 7 Res To be parameterized with 0 0

3.5 Downloading a File from PC to the Module

To download a file from the Configuration Builder to the module:

1 Verify that your PC is connected to the module with a null-modem serial cable

connected to the serial port on your PC and the serial port on the module

2 Open the Project Menu, and then choose Module.

3 On the Module menu, choose Download. Wait while ProSoft Configuration

scans for communication ports on your PC. When the scan is complete, the

Download dialog box opens.

4 Select the port to use for the download.

5 Click the Download button.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 60 61

Sin comentarios

Prosoft-technology 5205-DFNT-PDPS Manual de usuario Pagina 29