Prosoft-technology MVI69-GSC Manual de usuario descargar pdf (Pagina 89)

MVI69-GSC ♦ CompactLogix or MicroLogix Platform Reference

Generic ASCII Serial Communication Module User Manual

ProSoft Technology, Inc. Page 89 of 102

September 24, 2010

GSCErrorWord Definition

Member Name Bit in Word Description

Cfg_type Bit 0 The termination type configured for the port is not valid. Values

between 0 and 15 are the only ones valid. The module will use

type 0 (stream mode) for the port.

Cfg_Baud Bit 1 The baud rate entered for the port is not valid. The module will

use 9600 baud for the port.

Cfg_Parity Bit 2 The parity value entered is not valid. Values between 0 and 4

are accepted. The module has set the parity to a value of none

(0).

Cfg_DataBits Bit 3 The number of data bits for the protocol is not valid. Values

between 5 and 8 are accepted. The module assumes a value

of 8 data bits.

Cfg_StopBits Bit 4 The number of stop bits for the protocol is not valid. Values of 1

or 2 are accepted. The module assumes a value of 1 stop bit.

Cfg_Handshake Bit 5 The handshake code for the port is not valid. The value

entered must be in the range of 0 to 3. The module assumes a

value of 0 (no handshaking).

Cfg_Rtermcount Bit 6 The number of termination characters is not valid. The value

must be set between 1 and 12 when using the termination

character string to end a receive buffer. The module will not

terminate a buffer when using the termination character(s)

when this bit is set.

Cfg_RPacketLen Bit 7 The number of characters for a packet is not valid. The value

must be set between 1 and 4096 when the packet size

termination option is used. The module will not use the packet

length termination option when this bit is set.

Cfg_Rtimeout Bit 8 The message timeout value is set to zero. The module will not

use the message timeout termination option when this bit is

set.

Cfg_Rdelay Bit 9 The intercharacter delay value configured is set to zero. The

module will not use the intercharacter delay option when this

bit is set.

Cfg_Wtimeout Bit 10 The write message timeout parameter is set to zero. The

module assumes a value of 5000 milliseconds.

Bit 11

Bit 12

Bit 13

Bit 14

Err_ROverflow Bit 15 Data is being received faster on the port than the ladder logic

can process the read blocks. Alter the configuration of the

module or the connected device. Receive data is being lost.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 101 102

Comentarios a estos manuales

Sin comentarios

Prosoft-technology MVI69-GSC Manual de usuario Pagina 89

Comentarios a estos manuales

Relacionado con productos y manuales para Relé Prosoft-technology MVI69-GSC