Prosoft-technology AN-X-AMX Manual de usuario descargar pdf (Pagina 34)

Page 30 AN-X-AMXCAPT January 2008

Selecting an AN-X

Before you can perform an operation on an AN-X, you must select it. Choose

Utilities/Select An AN-X to select a specific AN-X.

From the Adapter list, select the network adapter that connects to the Ethernet network

that contains the AN-X.

In the Ethernet MAC Address field, enter the MAC Address of the AN-X you wish to

select. It can be found on the AN-X label or using the Locate All AN-X Modules

command. The format is as shown above, six pairs of hexadecimal digits separated by

hyphens.

In the IP Address field, enter the Ethernet IP address of the AN-X you wish to select. It

can be found using the Locate All AN-X Modules command. The format is as shown

above, four decimal numbers each in the range 0 to 255.

Both MAC address and IP address must match the settings on the AN-X in order for

communication to occur.

Click OK to select the AN-X.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 49 50

Sin comentarios

Prosoft-technology AN-X-AMX Manual de usuario Pagina 34