Prosoft-technology MVI56-DFCMR Manual de usuario descargar pdf (Pagina 21)

Installing and Configuring the Module MVI56-DFCMR ♦ ControlLogix Platform

DF1 Interface Module with Reduced Data Block

ProSoft Technology, Inc. Page 21 of 113

October 20, 2008

2 Installing and Configuring the Module

In This Chapter

 Modifying the Configuration Data .......................................................... 25

 Configuration Data ................................................................................27

This chapter describes how to install and configure the module to work with your

application. The configuration process consists of the following steps.

1 Use RSLogix 5000 to identify the module to the processor and add the

module to a project.

Note: The RSLogix 5000 software must be in "offline" mode to add the module to a project.

2 Modify the example ladder logic to meet the needs of your application, and

copy the ladder logic to the processor. Example ladder logic files are provided

on the CD-ROM.

Note: If you are installing this module in an existing application, you can copy the necessary

elements from the example ladder logic into your application.

The rest of this chapter describes these steps in more detail.

First, define the module to the system. Right-click the mouse button on the I/O

Configuration option in the Controller Organization window to display a pop-up

menu. Select the New Module option from the I/O Configuration menu.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 112 113

Sin comentarios

Prosoft-technology MVI56-DFCMR Manual de usuario Pagina 21