Prosoft-technology MVI56-DFCMR Manual de usuario descargar pdf (Pagina 30)

MVI56-DFCMR ♦ ControlLogix Platform Installing and Configuring the Module

DF1 Interface Module with Reduced Data Block

Page 30 of 113 ProSoft Technology, Inc.

October 20, 2008

5034 File Offset

This parameter sets the database register location of

the first element in the first file simulated in the

module. All offsets in the first file and subsequent

files will be computed using the address specified.

This value is fixed at 0. Therefore, the module

assumes N7:0 starts at the database offset of 0 and

each file is 200 words in size.

5035 Map Count Number of file map overrides.

5036 to 5039 Spare

2.2.3 Port 2 Setup

5040 Enable

This parameter is used to define if this port will be

utilized. If the parameter is set to 0, the port is

disabled. A value of 1 will enable the port.

5041 Type

This parameter defines if the port will emulate a

master or slave device. Enter 0 to emulate a master

device and 1 to emulate a slave device.

5042 Local Station ID

This parameter specifies the local station ID for all

DF1 messages sent from this master port. A value of

255 is not permitted as this is the broadcast address.

Enter a value in the range of 0 to 254.

5043 Protocol 0=full duplex, 1=half-duplex

5044 Termination Type

This parameter specifies the error checking for all

DF1 messages. 0=BCC, 1=CRC

5045 Baud Rate

This is the baud rate to be used on the port. Enter

the baud rate as a value.

Baud Rate Parameter Value

110 110

150 150

300 300

600 600

1200 12 or 1200

2400 24 or 2400

4800 48 or 4800

9600 96 or 9600

14,400 14, 114 or 14400

19,200 19, 192 or 19200

28,800 28, 288 or 28800

38,400 38, 384 or 38400

57,600 57 or 576

115,200 115 or 1152

5046 Parity

This is the Parity code to be used for the port. The

coded values are as follows: 0=None, 1=Odd,

2=Even.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 112 113

Comentarios a estos manuales

Sin comentarios

Prosoft-technology MVI56-DFCMR Manual de usuario Pagina 30

Comentarios a estos manuales

Relacionado con productos y manuales para Relé Prosoft-technology MVI56-DFCMR