ProSoft Technology ProTalk PTQ-104C Manual de usuario Pagina 93
- Pagina / 195
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
PTQ-104S Rev2 ♦ Quantum Platform Module Configuration
IEC 60870-5-104 Server for Quantum User Manual
ProSoft Technology, Inc. Page 93 of 195
February 22, 2013
Group Code
Description
0x00010000
Interrogated by group 16 interrogation
0x00020000
Interrogated by general counter request
0x00040000
Interrogated by group 1 counter request
0x00080000
Interrogated by group 2 counter request
0x00100000
Interrogated by group 3 counter request
0x00200000
Interrogated by group 4 counter request
0x40000000
Disable event scanning of this point
0x80000000
Periodic/cyclic data returned from unit
Note 1: Group 3 interrogation also returns the parameter data (ASDU 110 – threshold, low limit
and high limit) for all monitored measured points.
If the highest bit (bit 31) is set, data will be produced by the driver for the
specified point at the rate set for periodic data generation. Bit 30 (0x40000000)
enables scanning of this point for event generation. If the bit is clear and the data
type is set for scanning, events will be generated for the point. If the bit is set,
events will not be generated for the point. This feature can be used to select
which points will generate events for the controlling station and can get rid of
event data that is not important to the application.
5.25 To Create Optional Comment Entries
1 Click the plus sign to the left of the icon to expand the module
Comments.
2 Double-click the icon. The Edit - Module Comment dialog
appears.
3 Enter your comment and click OK to save your changes.
- PTQ-104S Rev2 1
- Your Feedback Please 2
- Information for ProTalk 3
- Product Users 3
- Warnings 3
- Important Notice: 4
- Contents 5
- 1 Start Here 11
- 1.1.1 Package Contents 12
- 1.1.2 Quantum Hardware 12
- 1.1.3 PC and Software 13
- THERNET CONFIGURATION icon 18
- DIT dialog box 19
- 2.1 Create a New Project 22
- EW DEVICE 23
- to continue 23
- 2.3 Build the Project 25
- ROGRESS dialog box 29
- TART / PROGRAMS / CONCEPT 32
- MODCONNECT TOOL 32
- 3.2 Creating a New Project 33
- dialog box 36
- to save the settings 38
- ES to confirm the settings 38
- PECIALS 39
- PECIALS dialog box 39
- 3.5 Saving the Project 40
- ODULE as PTQ: 46
- 5 Module Configuration 49
- 5.1.2 Set Module Parameters 53
- ILE menu, and choose PRINT 54
- 5.2.1 Read Register Start 55
- 5.2.2 Read Register Count 55
- 5.2.3 Write Register Start 55
- 5.2.4 Write Register Count 55
- 5.2.5 3X Register Start 55
- 5.2.6 4X Register Start 56
- 5.2.7 Module Name 56
- 5.2.8 Error Offset 56
- 5.3 Backplane Data Exchange 56
- 5.3.3 Event Messages (9958) 65
- 5.4 [SNTP CLIENT] 69
- 5.4.1 NTP Server IP Address 70
- 5.4.2 Time Zone 70
- 5.4.4 Database Register 71
- 5.5 [I104S] Section 71
- 5.6.1 Use IP List 72
- 5.6.2 Override StartDT 72
- O (0) or YES (1) 73
- to 1000, default value = 30 73
- 5.6.10 Time DB Offset 74
- 5.6.11 Error Offset 74
- seconds 75
- 5.6.19 Use ACTTERM with step 76
- 5.6.20 Event Scan Delay 76
- 5.6.22 Set Priority Queues 76
- 5.6.23 Cyclic Set IV Time 77
- 5.6.24 IV Check Delay Time 78
- 5.6.25 IV Fail Count 79
- 5.6.26 Scan Events 79
- 5.6.27 Time Type 80
- 5.6.28 Use Recent 80
- 5.7.1 Short Pulse Time 82
- 5.7.2 Long Pulse Time 82
- 5.7.5 Point Count 83
- 5.7.6 Sequence Flag 84
- 5.7.7 Parameter Offset 85
- ADDRESS value 87
- 5.24 Group Codes 92
- To Download the Project File 96
- OWNLOAD FROM PC TO 97
- OWNLOAD dialog box 97
- OWNLOAD button 97
- OWNLOAD dialog 100
- 7 Hot Standby Support 101
- 7.1 Hot Standby Overview 102
- 7.1.3 System Components 103
- Standby with Unity Systems 104
- Example #1 105
- 7.2.1 Overview 106
- In This Chapter 111
- 8.1.1 Required Hardware 112
- IAGNOSTICS 113
- IAGNOSTICS dialog box 113
- to open the Main Menu 114
- 8.1.3 Navigation 115
- 8.1.4 Main Menu 116
- to return to the Main Menu 120
- 8.2 LED Indicators 121
- 8.2.2 Error Status Table 122
- 9 Reference 123
- 9.1 Product Specifications 124
- 9.1.1 Standards 124
- 9.2.1 Module Address 127
- 9.2.3 Using Monitor Points 132
- Example - Mode A 138
- Example (C_SC_NA) 144
- 9.2.5 Data Communication 150
- Example: 151
- 9.2.6 Events 156
- Example - Event Priority 167
- 9.2.7 Sequence Flag 169
- 9.3 Cable Connections 170
- 9.3.1 Ethernet Connection 170
- 9.4 Error Status Table 171
- 9.5 Group Codes 174
- 9.6.1 System or device 175
- 9.6.2 Application Layer 175
- Point Number 186
- Database Address 186
- Group Assignment 186
- Default Deadband 187
- 9.7.4 C_RC_NA_1 Form 189
- 10.2 Warranty Information 192
Relacionado con productos y manuales para Servidores ProSoft Technology ProTalk PTQ-104C
(306 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.040 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales