ProSoft Technology ProLinx-HART Especificaciones Pagina 36
- Pagina / 124
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Configuring the Gateway DFNT ♦ ProLinx Gateway
Protocol Manual EtherNet/IP Explicit Messaging Client/Server
Page 36 of 124 ProSoft Technology, Inc.
July 24, 2013
If the module is configured for the serial DF1 half-duplex protocol, the module
can act as a master device routing messages between attached slave devices.
This peer-to-peer communication is defined in the DF1 protocol specification.
The master polls each DF1 slave device until no more data is available from the
device. Response messages from the slaves that have a destination address that
do not match the module are routed with a request message header back out
onto the network. This facility offers communication between the slave devices
for control and data monitoring. This feature is not available if the module is
configured for DF1 full-duplex mode (point-to-point).
The module supports numerous commands. This permits the module to interface
with a wide variety of DF1 protocol devices. This includes PLC2, PLC5, SLC-500
series, MicroLogix and ControlLogix processors. Additionally, other devices
supplied by Rockwell Automation that use the DF1 protocol are supported.
The format of each command in the list depends on the function being executed.
To simplify command construction, the module uses its own set of function codes
to associate a command with a DF1 command/function type. The tables below
list the functions supported by the module:
Basic Command Set Functions
Function
Code
Comman
d
Function
Definition
PLC5
SLC500 &
MicroLogix
Power-
monitor II
ControlLogix
1
0x00
N/A
Protected Write
X
X
2
0x01
N/A
Unprotected Read
X
X
X
3
0x02
N/A
Protected Bit Write
X
X
4
0x05
N/A
Unprotected Bit Write
X
X
5
0x08
N/A
Unprotected Write
X
X
X
PLC-5 Command Set Functions
Function
Code
Command
Function
Definition
PLC5
SLC500 &
MicroLogix
Power-
monitor II
ControlLogix
100
0x0F
0x00
Word Range Write
(Binary Address)
X
X
101
0x0F
0x01
Word Range Read
(Binary Address)
X
X
102
0x0F
0x26
Read-Modify-Write
(Binary Address)
X
X
150
0x0F
0x00
Word Range Write
(ASCII Address)
X
X
151
0x0F
0x01
Word Range Read
(ASCII Address)
X
X
152
0x0F
0x26
Read-Modify-Write
(ASCII Address)
X
X
- PROTOCOL MANUAL 1
- Your Feedback Please 2
- How to Contact Us 2
- ProSoft Technology 2
- Product Documentation 2
- Products Warnings 3
- Contents 5
- 1 Start Here 9
- 1.1 System Requirements 10
- 1.2 Package Contents 11
- 1.5.1 Using the Online Help 14
- 2 Functional Overview 15
- 2.2 EtherNet/IP (DFNT) Port 17
- THERNET DEVICES 28
- 3 Configuring the Gateway 31
- 3.1.2 Renaming PCB Objects 33
- 3.2 [DFNT Client x] 34
- 3.2.1 Minimum Command Delay 34
- 3.2.2 Response Timeout 34
- 3.2.3 Retry Count 34
- 3.3.1 Command List 35
- 3.3.2 Command Entry Formats 38
- 3.4 [DFNT UClient 0] 42
- 3.4.1 Minimum Command Delay 42
- 3.4.2 Response Timeout 42
- 3.4.3 Retry Count 42
- 3.6.1 Moving Data 45
- 3.6.2 From Address 45
- 3.6.3 To Address 45
- 3.6.4 Register Count 45
- 3.6.5 Swap Code 45
- 3.6.6 Delay Preset 47
- 4.1.1 Required Hardware 52
- IAGNOSTICS 53
- dialog box 53
- to open the Main menu 53
- 4.1.3 Navigation 54
- 4.2 Base Module LEDs 56
- 4.3.1 DFNT Client 0 Status 57
- 4.3.4 DFNT Server 0 59
- 4.5 Error Codes 62
- 4.5.1 Local STS Error Codes 62
- 4.6 TCP/IP Interface Errors 66
- 4.6.1 Timeout Errors 66
- 4.6.4 PCCC Response Errors 67
- 5 Reference 69
- 5.1 Command Function Codes 70
- (Binary Address) 75
- (ASCII Address) 78
- Address Fields) 80
- (Three Address Fields) 84
- 5.4 SLC Processor Specifics 87
- 5.4.1 SLC File Types 87
- 5.5.1 SLC File Types 88
- 5.7 RSLinx Software 90
- 5.7.1 DDE Connection 93
- 5.7.2 OPC Connection 97
- 5.8 RSView Software 100
- INT_DATA 107
- OMMUNICATION 108
- 5.10 PLC5 Processor 111
- 5.10.1 PLC5 Write Commands 111
- 5.10.2 PLC5 Read Commands 112
- 5.11 SLC 5/05 Processor 114
- 5.11.2 SLC5/05 Read Commands 115
- In This Chapter 119
- Contacting Technical Support 119
- 6.1 Warranty Information 120
Relacionado con productos y manuales para Gateways / Controladores ProSoft Technology ProLinx-HART
(104 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.048 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales