Prosoft-technology MVI56E-DNPNET Manual de usuario Pagina 25

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 140
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 24
MVI56E-DNPNET ControlLogix Platform Contents
DNPNET Ethernet Client/Server Communication Module User Manual
ProSoft Technology, Inc. Page 25 of 140
February 13, 2015
1.7 Connecting Your PC to the ControlLogix Processor
There are several ways to establish communication between your PC and the ControlLogix
processor. The following steps show how to establish communication through the serial
interface. It is not mandatory that you use the processor's serial interface. You may access
the processor through whatever network interface is available on your system. Refer to your
Rockwell Automation documentation for information on other connection methods.
1 Connect the right-angle connector end of the cable to your controller at the
communications port.
2 Connect the straight connector end of the cable to the serial port on your computer.
1.8 Downloading the Sample Program to the Processor
Note: The key switch on the front of the ControlLogix processor must be in the REM or PROG position.
Vista de pagina 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 139 140

Comentarios a estos manuales

Sin comentarios