Prosoft-technology MVI56E-DNPNET Manual de usuario descargar pdf (Pagina 41)

MVI56E-DNPNET ♦ ControlLogix Platform Contents

DNPNET Ethernet Client/Server Communication Module User Manual

ProSoft Technology, Inc. Page 41 of 140

February 13, 2015

2 Edit the length inside the [ ] of the DNPNET_Server_List[ ] Data Type.

3 When finished, click APPLY and then click YES to accept changes to the Data Type

4 Click OK to close this window.

5 Save and download the RSLogix 5000 program to the processor.

6 Reboot the MVI56E-DNPNET for changes to be downloaded to the module.

2.3.8 DNPNET.CONFIG.DNP_Client_Commands[x]

Configures a list of commands the MVI56E-DNPNET client sends to DNP3 Ethernet servers.

The default array size is five, and the maximum is 300.

Tag Name

Range

Description

DNPNET.CONFIG.DNP_Client

_Commands[x].Port_Flags

Mapped bits [0:3]

Bits in the Port/Flags parameter are dependent

on the data type. Clear 3rd bit to disable. Set

5th bit to select IED DB for write functions.

DNPNET.CONFIG.DNP_Client

_Commands[x].Server_Addres

0 to 32767

This parameter specifies the DNP server

address on the DNP network to which the

command will be sent. (This is not the IP

address of the server). The parameter has a

range of 0 to 65535. The value of 65535 is

reserved for broadcast messages. Verify that

the server configuration information is set up in

the module for each server defined in the

command list.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 139 140

Sin comentarios

Prosoft-technology MVI56E-DNPNET Manual de usuario Pagina 41