Prosoft-technology AN-X-AMX Manual de usuario descargar pdf (Pagina 43)

AN-X-DCSNet2 Page

Enter a Host Name for the AN-X. This name is used internally by AN-X

and may be used to identify the AN-X if you have a DNS server on your

network. The name can be from 1 to 31 characters long.

To configure the AN-X to obtain its IP address from a DHCP server on

the network, select Obtain an IP address automatically (DHCP)

To configure the AN-X to use a static IP address, select Use the

following Settings and enter the following:

• the desired IP address for the AN-X.

• the Subnet mask for the AN-X

• the default gateway for your network.

You must enter a valid default gateway address even if there is no device

at the gateway address on the network.

Click OK to complete the configuration.

Utilities/AN-X IP Configuration resets the selected AN-X. Use the

Utilities/Restart AN-X to restart the AN-X in production mode.

If you Cancel the Utilities/AN-X IP Configuration command, AN-X is

left running the boot code. Use the Utilities/Restart AN-X command to

restart the AN-X.

Restart an AN-X

Use the Utilities/Restart AN-X command to restart the currently selected

AN-X.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 67 68

Sin comentarios

Prosoft-technology AN-X-AMX Manual de usuario Pagina 43