Prosoft-technology AN-X-AMX Manual de usuario descargar pdf (Pagina 50)

Page

AN-X-DCSNet2 November 2011

• ControlLogix configuration

Update Firmware Command

The Utilities/Update Firmware command updates all the firmware on an

AN-X you have previously selected using the Utilities/Select An AN-X

command.

This command resets the AN-X. You will receive a warning and be

given the opportunity to Cancel the command.

If you cancel at the filename dialog, the AN-X has already been reset and

is in configuration mode. Use the Utilities/Restart AN-X command to

restart it in production mode.

Click the Next>> button, and select the firmware file you want to

download and click Open.

AnxInit transfers the firmware file and restarts the AN-X.

After you run update the firmware, you must reconfigure the AN-X and

restore:

• DCS drop number and depth

• ControlLogix configuration

• AN-X to AN-X configuration

Patch Firmware

The Utilities/Patch Firmware command applies small patches to the

firmware running on the AN-X.

These patch files files have extension pch.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 67 68

Sin comentarios

Prosoft-technology AN-X-AMX Manual de usuario Pagina 50