Prosoft-technology AN-X-AMX Manual de usuario descargar pdf (Pagina 65)

AN-X-DCSNet2 Page

Updating the Firmware

The AN-X operating software consists of several parts:

• boot code, runs at startup

• configuration kernel, runs when you update firmware

• production kernel, runs in normal operation

• application software, for DCS communication, scheduled

communication with ControlLogix and unscheduled messaging, and

AN-X to AN-X communication

The kernels are supplied in file with extension qtf and are updated using

the AnxInit utility. Run the command Utilities/Update AN-X Flash and

select the file you wish to download. Refer to page 41 for details.

Firmware files contain the application programs for AN-X and have

extension bin. They are downloaded using the command

Configuration/Firmware Update or Utilities/Update Firmware in

AnxInit. Refer to page 42 for details.

Occasionally individual patch files are released. They have extension pch

and are downloaded using the Utilities/Patch Firmware command in

AnxInit. Refer to page 46 for details.

Reading Version Numbers

To read the version numbers of the various software components:

Boot code AnxInit – AN-X Info

Configuration kernel AnxInit – AN-X Info

Production kernel AnxInit – AN-X Info

Firmware AnxInit – AN-X Info (version depends on

current mode, boot, configuration or

production)

ControlLogix scheduled

communication and

unscheduled messaging

Web interface, ControlLogix Log

1 2 ... 60 61 62 63 64 65 66 67 68

Sin comentarios

Prosoft-technology AN-X-AMX Manual de usuario Pagina 65