Prosoft-technology AN-X-AMX Manual de usuario descargar pdf (Pagina 63)

AN-X-DCSNet2 Page

At startup, the SYS LED sequence is:

• boot code starts – fast flashing red

• boot code loads a kernel – solid red

• if the configuration kernel is loaded, 2 red flashes followed by a

pause

• if the production kernel loads with no errors, solid green

NET LED – DCS Network Status

The NET LED indicates the status of the DCS network connection.

DCS Master

All drops operating correctly Solid green

No other drops Yellow

Network error Flashes red

DCS Slave

All drops operating correctly Solid green

No other drops Solid red

Network error Flashes red

DCS Diagnostic Counters

AN-X maintains standard DCS drop 0 diagnostic counters. Use

Automation Network/Monitor DCSNet in the web interface to view the

diagnostic counters.

The counters are:

4-7 Drop status table

12 Local station’s drop number

14 Messages received

15 Receive timeouts

16 CRC errors

17 Overrun errors

18 Abort errors

19 Messages transmitted

20 Local station’s drop depth

1 2 ... 58 59 60 61 62 63 64 65 66 67 68

Sin comentarios

Prosoft-technology AN-X-AMX Manual de usuario Pagina 63