Prosoft-technology AN-X-AMX Manual de usuario descargar pdf (Pagina 11)

AN-X-AMXRIO Page

Ethernet Configuration

The AN-X-AMXRIO module connects a computer or other device on Ethernet to a

Reliance AutoMax remote I/O network.

Before you can use the AN-X-AMXRIO to scan I/O, you must configure its Ethernet

network properties.

Ethernet Configuration

AN-X can be configured to use a static (unchanging) IP address or it can be configured to

obtain its IP address from a DHCP server.

Unless you have control of the DHCP server, in most applications you will want to

configure AN-X to use a static IP address. Otherwise the DHCP server may assign a

different IP address each time AN-X powers up, and any software that accesses the AN-

X module would have to be reconfigured to use the new IP address.

AN-X is shipped with DHCP enabled. If the AN-X module finds a DHCP server on the

network, the AN-X module obtains its IP address from the DHCP server. You can use the

utility AnxInit to find the IP address that the DHCP server assigned. Select

Utilities/Locate All AN-X Modules and AnxInit will locate the AN-X and display its IP

address. See page 29.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 54 55

Sin comentarios

Prosoft-technology AN-X-AMX Manual de usuario Pagina 11