Prosoft-technology AN-X-AMX Manual de usuario descargar pdf (Pagina 37)

AN-X-AMXRIO Page

Possible status values are:

Value Meaning

1 Boot mode

2 Configuration mode

4 Production mode

Read Kernel Parameters

The Utilities/Read Kernel Parameters command displays various communications

parameters for the currently selected AN-X

This command resets the AN-X. You will be warned and given the opportunity to cancel

the command.

The Utilities/Read Kernel Parameters command leaves the AN-X running the boot code.

Use the Utilities/Restart AN-X command to restart the AN-X in production mode.

Run Config Mode

The Utilities/Run Config Mode command is used to restart the currently selected AN-X

in configuration mode (normally used internally for updating firmware).

This command is not used in normal operation but may be required for technical support.

When the AN-X is in configuration mode, the SYS LED flashes red twice, followed by a

pause.

To exit configuration mode, use the Utilities/Restart AN-X command to restart AN-X in

production mode.

Update AN-X Flash

The Utilities/Update AN-X Flash command updates the low-level firmware

(configuration kernel and production kernel).

Files have extension qtf. Current AN-X kernel files are provided on the distribution CD.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 54 55

Sin comentarios

Prosoft-technology AN-X-AMX Manual de usuario Pagina 37