Prosoft-technology AN-X-AMX Manual de usuario descargar pdf (Pagina 42)

Page

AN-X-AMXRIO November 2011

• AN-X to AN-X configuration

Update Firmware Command

The Utilities/Update Firmware command updates all the firmware on an AN-X you have

previously selected using the Utilities/Select An AN-X command.

This command resets the AN-X. You will receive a warning and be given the

opportunity to Cancel the command.

If you cancel at the filename dialog, the AN-X has already been reset and is in

configuration mode. Use the Utilities/Restart AN-X command to restart it in production

mode.

Click the Next>> button, and select the firmware file you want to download and click

Open.

AnxInit transfers the firmware file and restarts the AN-X.

After you update the firmware, you must reconfigure the AN-X and restore the AutoMax

remote I/O configuration

Patch Firmware

The Utilities/Patch Firmware command applies small patches to the firmware running on

the AN-X.

These patch files files have extension pch.

This command resets the AN-X. You will receive a warning and be given the

opportunity to Cancel the command.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 54 55

Sin comentarios

Prosoft-technology AN-X-AMX Manual de usuario Pagina 42