Prosoft-technology AN-X-AMX Manual de usuario descargar pdf (Pagina 36)

Page

AN-X-AMXRIO November 2011

• the Subnet mask for the AN-X

• the default gateway for your network.

You must enter a valid default gateway address even if there is no device at the gateway

address on the network.

Click OK to complete the configuration.

Utilities/AN-X IP Configuration resets the selected AN-X. Use the Utilities/Restart AN-X

to restart the AN-X in production mode.

If you Cancel the Utilities/AN-X IP Configuration command, AN-X is left running the

boot code. Use the Utilities/Restart AN-X command to restart the AN-X.

Restart an AN-X

Use the Utilities/Restart AN-X command to restart the currently selected AN-X.

AN-X Info

The Utilities/AN-X Info command provides information about the currently selected AN-

X in the log window.

The information shown:

AN-X Info Ethernet MAC address

SerNum Serial number

DaughterID Daughterboard ID, 3 for AN-X-AMXRIO

BootRev Boot code version

ConfigRev Configuration kernel version

ProdRev Production kernel version

HwRev Hardware version

FirmwRev Firmware release version (depends on current operating mode)

Status see below

VendorId Vendor ID

ProdId Product ID

IpAddrStr IP address assigned using Utilities/AN-X IP Configuration

HostName name assigned using Utilities/AN-X IP Configuration

In boot mode, FirmwRev, Vendor ID and Product ID and not valid, and IpAddrStr and

HostName are not shown.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 54 55

Sin comentarios

Prosoft-technology AN-X-AMX Manual de usuario Pagina 36