Prosoft-technology PLX81-EIP-61850 Manual de usuario descargar pdf (Pagina 72)

Diagnostics and Troubleshooting PLX8x-EIP-61850 ♦ Communication Gateway

User Manual Server to

IEC 61850 Client

Page 72 of 167 ProSoft Technology, Inc.

July 2, 2015

4.7 Web Service and Gateway Web Page

When the gateway's IP address is accessed through a browser (such as Internet

Explorer) or the ProSoft Discovery Service, it shows the gateway's Web page.

The gateway's Web Services are connection-based, and therefore can accept

multiple connections at a time. Multiple users can view the gateway's Web page

at the same time.

Note: In order to access the web server the module must be booted with the MODE 3 jumper on. If

the module is booted with the MODE 3 jumper removed the web server is not started. Removing

the setup jumper and restarting after configuring the module or accessing the web page helps

prevent performance degradation from web server access while in run mode. Refer to Setting

Jumpers on page 11.

Functions

Firmware Upgrade

Click to upgrade the firmware in the gateway. Only do this if

instructed to do so by ProSoft Technology Technical Support.

Set Date & Time

Click to set the date and time in the gateway.

Reboot Module

Click reboot the gateway.

Technical Support

Click to be directed to the ProSoft Technology Technical Support

website.

Homepage

Click to go to the gateway’s homepage (shown above).

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 166 167

Sin comentarios

Prosoft-technology PLX81-EIP-61850 Manual de usuario Pagina 72