ProSoft Technology inRA-x ILX34-AENWG Guia de preparacion descargar pdf (Pagina 54)

ILX34-AENWG ♦ POINT I/O Platform Procedures

Wireless Point I/O Adapter Setup Guide

Page 54 of 79 ProSoft Technology, Inc.

July 31, 2009

View Module Data

You can view module data and communication status in the controller tags in

RSLogix 5000. The following illustration shows the ILX34-AENWG configured

with the sample application.

 ILX34_AENWG = the name you gave to your Ethernet adapter

 # = slot number of POINT I/O module

 C = configuration, I = input, O = output

Use the controller tags in your ladder program to read input data or write output

data.

 Slot Status Bits: The Slot Status bits display the connection status for each of

the POINT I/O modules that use a rack-optimized connection.

 Bit 0 is reserved for the adapter and always reports a value of 1.

 Each of the other bits (1 to 63) correspond to a POINT I/O module that you

install in the POINT I/O backplane.

 In this example, we configured the ILX34-AENWG adapter for both rack-

optimized and direct connections.

 The slot status bits indicate that the module in slot 2 is operating correctly:

o 0=module participating with no errors and

o 1=module not participating or connection error (typically, module

removed/missing)

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 78 79

Sin comentarios

ProSoft Technology inRA-x ILX34-AENWG Guia de preparacion Pagina 54