Prosoft-technology 5204SE-MNET-PDPMV1 Manual de usuario Pagina 211
- Pagina / 235
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Reference 5204SE-MNET-PDPMV1 ♦ ProLinx Gateway
User Manual Modbus TCP/IP to PROFIBUS DP-V1 Pass-Through Master
ProSoft Technology, Inc. Page 211 of 235
December 22, 2009
New Slave Address
Range 0 to 125
Specifies the new address of the slave.
Slave Ident Number
Ident number for the slave, which address should be altered.
No_Add_Change
This parameter specifies whether it is allowed to change the slave address again
at a later stage. If this is not allowed, then it is only possible to change the
address with this function after initial reset. After the initial reset, the slave takes
the default address 126.
00h Change of address is still possible at a later stage
01h - FFh Change of address is only possible after the initial address (the
default address = 126)
Error Code [1 ... 4]
If 'Return Code' equals 8030h ('Negative indication from lower layer'), status
values according to the DP-specification is available in 'Error Code 1'. Error
Codes 2 to 4 are reserved.
(See Return Codes (page 219) and Error Codes)
Fault Information and Extended Fault Information
"Fault Information" Contents "Extended Fault Information" Contents
0001h Current Slave Address out of range -
0002h New Slave Address out of range -
000Ah Failed to send Global Control
request
For additional fault information, see Return
Codes (page 219)
000Bh Remote Station Failure For additional fault information, see Return
Codes (page 219)
00FFh Module offline (not initialized or no valid database)
Slave Data
With this parameter it is possible to deliver user specific data. The data is stored
in the slave if possible (EEPROM, FLASH, etc.)
- 5204SE-MNET 1
- All ProLinx 2
- Products 2
- Your Feedback Please 2
- ProSoft Technology 3
- Product Documentation 3
- Contents 5
- 1 Scope 7
- 1.3 System Requirements 8
- 2 Functional Overview 9
- 2.2 Architecture 10
- 3 Procedures 17
- 3.2.1 Using the Online Help 18
- 3.3 Set Module Parameters 21
- 3.4 Configure the Gateway 23
- DP tree 25
- OMMON tab of the Slave 29
- to close the 29
- ROJECT menu and choose 29
- SHOW PLX 30
- SLOT NUMBERS and 31
- ADDRESSES 31
- to close 31
- PDPM-V1 tree 32
- ES, the gateway will use 35
- OMMONNET option to reach the 40
- THERNET CONFIGURATION 40
- GATEWAY (Default Gateway) 41
- AVE AS 42
- OWNLOAD FROM PC TO DEVICE 43
- HOW PLX MEMORY MAP 47
- 3.5.1 Creating a Password 50
- 3.5.2 Changing a Password 52
- ET/RESET PASSWORD button 54
- BUS object 61
- FUNCTIONAL PROJECT icon 64
- IMPORT 64
- YNAMIC ARRAY LANGUAGE 68
- ROJECT SETTINGS 68
- ANGUAGE EXTENSIONS tab and 69
- LLOW DYNAMIC 70
- Gateway 72
- to continue 74
- ROJECT BROWSER, expand 75
- EW DEVICE 75
- ILE menu and choose 79
- NIMATION 93
- 4 Reference 95
- ONTENTS tab and 97
- FOR i:=0 to 15 DO 105
- %MW1[i]:=%MW200[i] ; 105
- END_FOR ; 105
- FOR j:=0 to 63 DO 108
- LastExecuted as type INT 113
- Start as type BOOL 113
- Function Blocks 137
- MASTER DPV1] INPUT 147
- ATA SIZE parameter 147
- MASTER DPV1] OUTPUT DATA 151
- IZE parameter 151
- Quantum 161
- 4.7.2 Return Codes 219
- 4.7.3 Error Codes 219
- 4.7.4 DP-V1 Error Codes 220
- 4.7.5 Command Error Codes 221
- 5 Conclusion 223
- 5.2 How to Get Help 224
- In This Chapter 225
- 6.2.1 All Product Returns: 226
- 6.3 LIMITED WARRANTY 227
- 6.3.8 No Other Warranties 231
- 6.3.9 Allocation of Risks 231
Relacionado con productos y manuales para Relé Prosoft-technology 5204SE-MNET-PDPMV1
Relé Prosoft-technology 5205-104S-PDPS Manual de usuario
(128 paginas)
(128 paginas)
Relé Prosoft-technology AN-X-PB Manual de usuario
(61 paginas)
(61 paginas)
Chief FCABX18_36 Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Hardware Chief FCABX18_36.
Wir stellen 1 PDF-Handbücher Chief FCABX18_36 zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung
Comentarios a estos manuales