Prosoft-technology 5204SE-MNET-PDPMV1 Manual de usuario descargar pdf (Pagina 53)

Procedures 5204SE-MNET-PDPMV1 ♦ ProLinx Gateway

User Manual Modbus TCP/IP to PROFIBUS DP-V1 Pass-Through Master

ProSoft Technology, Inc. Page 53 of 235

December 22, 2009

2 You will notice the Old Password entry box is white, just like the other boxes.

This indicates that password protection is currently enabled on this gateway.

To change the password, you will need to enter the current passwork in the

Old Password entry box, enter a new password in the New Password box,

and then retype the new password in the Re-Enter New Password box. The

password can be any combination of four (4) to twelve (12) letter and number

(alphanumeric) characters. The password is case sensitive, meaning:

o password1

o PASSWORD1

o PaSsWoRd1

are three different passwords, not the same password typed three different

ways.

3 Click OK. You will see a download progress bar near the top of the download

dialog box indicate that the new password is being downloaded to the

gateway. When you see the success dialog sceen appear, the new

password has been successfully installed. You will now be required to enter

this new password whenever you wish to download a configuration to the

gateway.

If the progress bar indicates the process has finished but you do not see the

success window, then the new password has not been successfully changed

on the gateway and the old password is still in effect. Make sure that the

length of the new password you are trying to set is no less than 4

alphanumberic characters and no more than 12 alphanumeric characters,

and try the procedure again.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 234 235

Sin comentarios

Prosoft-technology 5204SE-MNET-PDPMV1 Manual de usuario Pagina 53