Prosoft-technology 5204SE-MNET-PDPMV1 Manual de usuario Pagina 212

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 235
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 211
5204SE-MNET-PDPMV1 ProLinx Gateway Reference
Modbus TCP/IP to PROFIBUS DP-V1 Pass-Through Master User Manual
Page 212 of 235 ProSoft Technology, Inc.
December 22, 2009
4.6.9 Get Database Information Message Structure
Parameter Description
Command initiator Application
Command Name FB_APPL_GET_DATABASE_INFO
Command number 0017h
Fragmented No
Firmware Revision All
Command and response layout: Get Database Information
Command Response
Message ID (ID) (ID)
Acyclic Message Status
Word
4002h 0002h
Command 0017h 0017h Get Database Info
Data size 0000h 0040h
Frame count 0001h 0001h
Frame number 0001h 0001h
Offset high 0000h 0000h
Offset low 0000h 0000h
Extended word 1 Total Output Length
Extended word 2 - Total Input Length
Extended word 3 - Init Output Size
Extended word 4 - Init Input Size
Extended word 5 -
No. of
Slaves
-
Extended word 6 - -
Extended word 7 - -
Extended word 8 - Fault Information
Database Description
(ASCII, 64 characters)
Response data word 1 to 32
Total Input Length, Total Output Length: The sum of Input/Output lengths for
all slaves in the database (in bytes).
Init Input size, Init Output size: Required initialization Input/Output sizes for the
current database. If the slaves are located in a contiguous block, these sizes are
the same as total Input/Output lengths.
Note: The input/output direction refers to the directions and naming used for the DPRAM areas,
not to the input/output directions used in the bus database or the NetTool-PB.
Database Description: String of ASCII characters that describes the data base
file. This is the string that was written to the database by the
"FB_APPL_END_DATABASE_DOWNLOAD" command.
No. of Slaves: Number of configured slaves in the database.
Vista de pagina 211
1 2 ... 207 208 209 210 211 212 213 214 215 216 217 ... 234 235

Comentarios a estos manuales

Sin comentarios