Prosoft-technology MVI71-DFNT Manual de usuario descargar pdf (Pagina 110)

Reference MVI71-DFNT ♦ PLC 5

User Manual EtherNet/IP Client/Server Communication Module

Page 110 of 175 ProSoft Technology, Inc.

February 3, 2011

5.8 Configuration Data

This section contains a listing of the parameters and their definitions for the

MVI71-DFNT module configuration.

[Section]/Item Value Range Description

[MODULE] Configuration header for general module

information

Module Name: Up to 80 chars Name of the module for use on reports. Use this

parameter to identify your module in your system.

Read Register

Start:

0 to 3999 This parameter specifies the starting register in the

module where data will be transferred from the

module to the processor. Valid range for this

parameter is 0 to 3999.

Read Register

Count:

0 to 3960 This parameter specifies the number of registers to

be transferred from the module to the processor.

Valid entry for this parameter is 0 to 3960.

Write Register

Start:

0 to 3999 This parameter specifies the starting register in the

module where the data transferred from the

processor will be placed. Valid range for this

parameter is 0 to 3999.

Write Register

Count:

0 to 3960 This parameter specifies the number of registers to

transfer from the processor to the module. Valid

entry for this parameter is 0 to 3960.

Failure Flag Count: 0 to 65535 This parameter specifies the number of successive

transfer errors that must occur before the

communication ports are shut down. If the

parameter is set to 0, the communication ports will

continue to operate under all conditions. If the value

is set larger than 0 (1 to 65535), communications

will cease if the specified number of failures occur.

Initialize Output

Data:

0 or 1 This parameter determines if the output data for the

module should be initialized with values from the

processor. If the value is set to 0, the output data

will be initialized to 0. If the value is set to 1, the

data will be initialized with data from the processor.

Use of this option requires associated ladder logic

to pass the data from the processor to the module.

DFNT Server File

Size

100 or 1000 Sets the maximum file size (100 or 1000) for the

servers

[Section]/Item Value Range Description

[DF1 Pass-Through Server Port 1] Start header for the pass-through server

Enabled: Y or N This parameter determines if the pass-through

server will be utilized.

Server Port

Number:

1 to 65535 Service port number to be associated with this

server. The number assigned must match that used

by the client software to establish the connection.

Busy Timeout: 100 to 65535

milliseconds

This parameter sets the number of milliseconds the

server will wait for the pass-through port to become

available. Valid data range for this parameter is 100

to 65535.

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 174 175

Comentarios a estos manuales

Sin comentarios

Prosoft-technology MVI71-DFNT Manual de usuario Pagina 110

Comentarios a estos manuales

Relacionado con productos y manuales para Relé Prosoft-technology MVI71-DFNT