Prosoft-technology MVI71-DFNT Manual de usuario descargar pdf (Pagina 127)

MVI71-DFNT ♦ PLC 5 Reference

EtherNet/IP Client/Server Communication Module User Manual

ProSoft Technology, Inc. Page 127 of 175

February 3, 2011

5.11.15 Function Code #510 - Protected Typed Logical Write (Three

Address Fields)

Column Parameter Description Parameter

1 Enable/Type Word 0=Disabled, 1=Continuous and 2=Conditional.

2 Virtual Database Address This parameter defines the database address of the first

data point to be associated with the command.

3 Poll Interval Minimum time in tenths of a second to wait before

polling with this command.

4 Count Number of data word values to be considered by the

function.

5 Swap Type Code Swap type code for command: 0=None, 1=Swap words,

2=Swap words & bytes and 3=swap bytes in each word.

6 Node Address Address of unit to reach on the data highway.

7 Slot Number Processor slot number in Control/CompactLogix rack.

Use -1 for PLC5 & SLC processors.

8 Function Code = 510 Logical Write Command

9 File Type SLC file type letter as used in file name string. Valid

values for the system are N, S, F, A, ….

10 File Number SLC file number to be associated with the command. P2

11 Element Number The parameter defines the element in the file where

write operation will start.

12 Sub-Element Number This parameter defines the sub-element for the

command. Refer to the AB documentation for a list of

valid sub-element codes.

This function writes one or more words of data to a PLC data table. This function

should work on the following devices: SLC 500, SLC 5/03 and SLC 5/04.

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 174 175

Sin comentarios

Prosoft-technology MVI71-DFNT Manual de usuario Pagina 127