Prosoft-technology MVI71-DFNT Manual de usuario descargar pdf (Pagina 84)

Reference MVI71-DFNT ♦ PLC 5

User Manual EtherNet/IP Client/Server Communication Module

Page 84 of 175 ProSoft Technology, Inc.

February 3, 2011

5.3.2 RS-232 Configuration/Debug Port

This port is physically an RJ45 connection. An RJ45 to DB-9 adapter cable is

included with the module. This port permits a PC based terminal emulation

program to view configuration and status data in the module and to control the

module. The cable for communications on this port is shown in the following

diagram:

The communication port driver in RSLinx can occasionally prevent other

applications from using the PC’s COM port. If you are not able to connect to the

module’s configuration/debug port using ProSoft Configuration Builder (PCB),

HyperTerminal or another terminal emulator, follow these steps to disable the

RSLinx driver.

Disabling the RSLinx Driver for the Com Port on the PC

1 Open RSLinx and go to COMMUNICATIONS > RSWHO.

2 Make sure that you are not actively browsing using the driver that you wish to

stop. The following shows an actively browsed network.

3 Notice how the DF1 driver is opened, and the driver is looking for a processor

on node 1. If the network is being browsed, then you will not be able to stop

this driver. To stop the driver your RSWho screen should look like this:

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 174 175

Sin comentarios

Prosoft-technology MVI71-DFNT Manual de usuario Pagina 84